Logo

BMW Fault Code - 124

Check 124 Fault Code

BMW Fault Code: 124

124 - CAN acknowledgement,emergency shutdown of DMEL control unit

System: Electronic Engine Power Control

BMW System: EML

Type: Drive

Activation DISA Solenoid

Fault Code Table : MS41

The next generation Siemens MS ECUs introduced many of the OBD2 features. This includes Catalytic Converter monitoring and Long / Short term Fueling and Ignition Adaptation. The MS41 was used on the M52 series of engines, MS42 on the M52TU series, and MS43 on the M43 4 Cylinders.

The OBD2 P codes fault protocol was not activated in European markets on this group, as currently it was not required by law.

Activation DISA Solenoid

Fault Code Table : MS42

The next generation Siemens MS ECUs introduced many of the OBD2 features. This includes Catalytic Converter monitoring and Long / Short term Fueling and Ignition Adaptation. The MS41 was used on the M52 series of engines, MS42 on the M52TU series, and MS43 on the M43 4 Cylinders.

The OBD2 P codes fault protocol was not activated in European markets on this group, as currently it was not required by law.

Activation DISA Solenoid

Fault Code Table : MS43

The next generation Siemens MS ECUs introduced many of the OBD2 features. This includes Catalytic Converter monitoring and Long / Short term Fueling and Ignition Adaptation. The MS41 was used on the M52 series of engines, MS42 on the M52TU series, and MS43 on the M43 4 Cylinders.

The OBD2 P codes fault protocol was not activated in European markets on this group, as currently it was not required by law.

Intake Air Temperature Signal

Fault Code Table : DME M5.2.1

DME M5.2 and M5.2.1 are Bosch ECUs, used on the M44 4cyl engine, and the M62 V8, and the M72 V12.

Intake Air Temperature Signal

Fault Code Table : DME M5.2

DME M5.2 and M5.2.1 are Bosch ECUs, used on the M44 4cyl engine, and the M62 V8, and the M72 V12.

Battery Voltage

Fault Code Table : BMS46

The Bosch BMS46 is a Hybrid ECU, created from a joint effort with Siemens, and is used in later M43 engines used in the Z3 and E46 series.

Battery Voltage

Fault Code Table : BMS43

The Bosch BMS46 is a Hybrid ECU, created from a joint effort with Siemens, and is used in later M43 engines used in the Z3 and E46 series.

Intake Air Temperature Sensor

Fault Code Table : DME 7.2

The Bosch DME 7.2, also known as ME7.2, can be found on a number of V8 Petrol engines, used in the 5 and 7 Series amongst others. It uses Torque modeling to control the engine torque output depending on Throttle Pedal Position.

About | Contact | Privacy

Copyright © 2019 All rights reserved. BMW Faults are listed in here BMWFaultCodes.com .