BMW Fault Code - 107

Check 107 Fault Code

BMW Fault Code: 107

107 - Activation, fuel injector, cylinder 4

System: Digital Motor Electronics

BMW System: DME

Type: Drive

BMW Fault Code: 107

107 - Voltage supply (via DME main relay)

System: Digital Motor Electronics

BMW System: DME

Type: Drive

BMW Fault Code: 107

107 - Voltage supply (via DME main relay)

System: Digital Motor Electronics

BMW System: DME

Type: Drive

Electronic Throttle Self Test

Fault Code Table : DME MSS52

The MSS52 is an M Power ECU designed to run the E39 M5, the Z8 Roadster, and also the Wiesmann Roadsters. The MSS54 is used on the E46 M3 and on some Z3Ms. The system uses an Electronic Throttle to accurately control Air intake instead of the more common Cable throttles used on earlier vehicles

Electronic Throttle Self Test

Fault Code Table : DME MSS54

DME Relay Voltage Supply

Fault Code Table : DME M5.2.1

DME M5.2 and M5.2.1 are Bosch ECUs, used on the M44 4cyl engine, and the M62 V8, and the M72 V12.

DME Relay Voltage Supply

Fault Code Table : DME M5.2

DME M5.2 and M5.2.1 are Bosch ECUs, used on the M44 4cyl engine, and the M62 V8, and the M72 V12.

Injector Cylinder 4

Fault Code Table : BMS46

The Bosch BMS46 is a Hybrid ECU, created from a joint effort with Siemens, and is used in later M43 engines used in the Z3 and E46 series.

Injector Cylinder 4

Fault Code Table : BMS43

The Bosch BMS46 is a Hybrid ECU, created from a joint effort with Siemens, and is used in later M43 engines used in the Z3 and E46 series.

Control Unit Fault (ROM)

Fault Code Table : DME 7.2

The Bosch DME 7.2, also known as ME7.2, can be found on a number of V8 Petrol engines, used in the 5 and 7 Series amongst others. It uses Torque modeling to control the engine torque output depending on Throttle Pedal Position.

RPM sensor (Gradient)

Fault Code Table : ABS 1

The first BMW ABS system, This was a 3 channel system, controlling braking to the front wheels,and a single line for both rear wheels. The wheel speed info could be passed via data lines to traction control systems, which could determine if the vehicle speed signal given from the rear driven axle did not match with the front wheel speed signals and request torque reduction intervention from the ASC (Anti Skid Control) throttle body.